Forklift Training Schools Cambridge

Forklift Training Schools Cambridge - Know How To Operate A Forklift Properly With Our Forklift Training Schools

If you are searching for work as an operator of a forklift, our regulatory-compliant forklift training Schools offer excellent instruction in numerous types and styles of forklifts, lessons on pre-shift inspection, fuel types and handling of fuels, and safe operation of a forklift. Practical, hands-on training helps those participating in acquiring fundamental operational skills. Program content includes current rules governing the use of lift trucks. Our proven forklift Schools are intended to offer training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

While the forklift is in operation, do not raise or lower the forks. Loads must not extend higher than the backrest. This is due to the risk of the load sliding back in the direction of the operator. Inspect for overhead obstacles and ensure there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it slightly back.

While the load is lifted the forklift would be less steady. Make certain that no pedestrians cross under the elevated fork. The operator should never leave the lift truck while the load is raised.

The forks must be level when handling pallets, and high enough to extend all the way into and below the load. The width of the forks must provide equal distribution of weight.

Set the brakes and chock the wheels prior to unloading and loading the truck. The floors must be strong enough to support the weight of both the load and the forklift. Fixed jacks can be installed to support a semi-trailer which is not attached to a tractor. The entrance door height should clear the height of the forklift by at least 5 cm. Mark edges of ramps, docks or rail cars and avoid them.

Click to Download the pdf