Forklift Training Programs Cambridge

Forklift Training Programs Cambridge - Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift inspection, fuel types and handling of fuels, and safe utilization of a forklift. Hands-on, practical training assists participants in obtaining fundamental operational skills. Program content covers existing regulations governing the operation of forklifts. Our proven forklift programs are intended to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

How to Handle Loads Safely

When the forklift is in operation, do not lower or raise the forks. Loads must not extend above the backrest. This is due to the danger of the load sliding back in the direction of the operator. Check for overhead obstructions and make certain there is plenty of clearance prior to raising a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

While the load is raised the forklift would be less stable. Make certain that no pedestrians cross under the elevated fork. The operator should not leave the lift truck while the load is lifted.

The forks must be level when handling pallets, and high enough to extend all the way into and underneath the load. The width of the forks should provide equal distribution of weight.

Chock the wheels and set the brakes prior to loading and unloading the truck. The floors should be strong enough to support the combined weight of the load and the forklift. Fixed jacks can be installed in order to support a semi-trailer that is not attached to a tractor. The entrance door height must clear the forklift height by at least 5 cm. Mark edges of ramps, docks or rail cars and avoid them.

Do not stay inside a forklift for a long time without proper ventilation. The inside of the truck must be properly lighted and free of trash, loose objects and obstructions. Inspect for holes in the floor. The installation of nonslip material on the floor would help avoid slipping. Clear whichever obstacles from docks and dockplates and make certain surfaces are not oily or wet.

Never tow or push other vehicles using a lift truck.

Click to Download the pdf