Scissor Lift License Cambridge

Scissor Lift License Cambridge - The operation of scissor lifts carries an inherent chance of danger. Whatever type of powered equipment requires correct handling in order to prevent accidents causing damage or injury. Businesses must make certain that staff using this machine have the needed experience.

Unskilled employees should not be permitted by their companies to use scissor lifts. The lift is designed to raise people and materials to varied heights. Failure to know and fully abide by safety standard could result in injuries for the users or damage to the lift.

For scissor lift users, there is no legislation governing the utilization of fall protection. Then again, manufacturers can recommend the utilization of fall protection and in several circumstances tying off in scissor lifts may be required by employer guidelines, job-specific risk assessments or local rules.

In order to ensure that the scissor lift is in good working condition prior to using the machine, the operator should carry out a thorough check. This is the operator's task, even though the unit has already been in service that day. The operator's guidebook of the machinery contains a checklist for pre-operation.

The things that an operator has to look for when performing a scissor lift inspection, consists of checking tire-inflation pressure, and checking ground controls and platform controls to make certain they are functioning. Watch for any delayed movement on the fly section when the boom is retracting and extending because this can indicate some loose cables. When operating the controls, make certain that the emergency stop switches work. Operate functions against the equipment's cutout switches. Check the boom control system by cycling a boom lift to the furthest extent of its operating envelope. Safety limiters should automatically stop the unit before it moves into an unstable position, if they are working correctly. If they aren't, turn off the lift and ensure that it is fixed before it is utilized for a second time.

Safe and proper operating measures must be followed at all times. Levers must be operated with even, controlled pressure. A control lever should never be pushed from one position to the opposite position. The lever must be shifted to neutral, prior to stopping, and after that proceeding in the desired direction. When released, levers and control switches should return to the neutral position automatically. Depress the foot switch prior to operating platform controls.

Click to Download the pdf